Road Safety Week: 5 Wheel-End Checks to Make Before Winter
Road Safety Week is a reminder that safe journeys start before a vehicle leaves the yard. On HGVs, buses and trailers, the wheel end carries the weight of the vehicle and its load, and has a direct effect on steering, braking and stability.
Winter brings its own challenges. Wet, dirty roads mean more water, mud and grime reaching hubs, bearings, seals and brakes, where it can get between components, put them under extra strain and mask the early signs of a problem. With darker mornings and evenings and longer stopping distances, a small fault can quickly become a serious problem.
Here are five wheel-end checks to make as the weather turns:
1. Bearing condition
Wheel bearings let the wheels turn smoothly while supporting the vehicle’s weight. When a bearing starts to develop a problem, there’s usually some warning.
Listen for rumbling, grinding or any other unusual noise, especially if it changes with speed or when cornering. It’s also worth noting if one hub is running much hotter than the others, as that can point to a problem at that wheel end.
These checks apply all year round, not just in winter. Get any concerns looked at as soon as possible, since a faulty bearing left unchecked can lead to more extensive and costly damage at the wheel end.
2. Seals and leaks
Check for grease or oil around the wheel, rim, brakes and hub cap, and look for any visible damage to the seals.
Winter conditions put added demands on wheel-end seals. Worn or damaged seals can lead to premature bearing failure, so checking their condition is important. If lubricant has reached the brakes, report it, as it can affect braking performance.
3. Wheel nuts and wheel fitment
This is one of the quickest checks on the list, and one of the most important. Look for wheel nut indicators that have moved out of line, or rust streaks running from the nuts. Either can mean a nut has started to loosen.
Particularly in winter, dirt, grit and other contaminants can get trapped between components. Before a wheel is fitted, the stud threads and the contact faces on the wheel and hub should be clean. The nuts should then be tightened to the manufacturer’s specified torque and re-checked in line with recommended procedures.
4. Brakes
Pay attention to the vehicle’s brake wear warning system, and make sure the brakes are checked at every scheduled safety inspection, which many operators carry out every six weeks.
Any brake warning, or any concern about how the vehicle is braking, should be reported and investigated before the vehicle continues in service, especially in winter, when wet and icy roads put the brakes under more pressure.
5. ABS and EBS warnings
Anti-lock braking systems (ABS) and electronic braking systems (EBS) help the driver keep control under heavy braking. On slippery winter roads, that matters even more.
If an ABS or EBS warning appears on the dashboard, have it checked as soon as possible. During scheduled inspections, check that road grime or winter debris hasn’t affected the sensors, wiring or ABS ring.
None of these checks takes long, but together they help catch problems early, before they turn into a breakdown, an expensive repair or a risk to other road users. At CV Hubs & Bearings, our experienced team is always on hand to help keep your vehicles moving safely through the winter. Whatever you need, just get in touch here.
Back to news

